Henan Chongpeng Crane Group Co., Ltd. Company Logo Henan Chongpeng Crane Group Co., Ltd.
5 1

Building Material Lift Winch Price/Building Winch

Contact Now* Send an Inquiry to this supplier.
or
Start Order * Name your price

Browse by Category

Contact us

Henan Chongpeng Crane Group Co., Ltd.
[China]

Address
Weizhuang Industrial Area, Changyuan County, Xinxiang, Henan, China (Mainland) Xinxiang Henan
Phone
86-0373-3806633
Contact name
Amelia Duan

Quick Information

  • Place of Origin: China

Description

contact sale02 at chinawinchs dot com

 hydraulic winches manufacturers providing winch machine for cable pulling

General description of winch machine for cable pulling

In the winch industry, JM model slow speed electric winch is most commonly used winch in construction site or workshop, etc. And power supply for the electric winch varies from 110v-440v/50&60HZ according to different countries’ situation. The electric winch also can divided into: construction winch, marine winch, mine winch, building winch, cable winch, etc. With different models, speeds and structures, electric winch is used widely, such as road construction, bridge construction,factory, mines engineering, harbor, building, etc.Click here "Send enquiry"!

Specific details of winch machine for cable pulling

1.Loading capacity:0.5~200 ton or customized design;

2.Wire rope capacity:20~3600m or customzied design;

3.Working speed:5~20 m/min or customized design;

4.Power supply:220~690V,50/60HZ,three phase or customized design.

Application

1.Construction building;

2. Road and bridge construction ;

3.Factory,mines engineer,harbor,etc.

Advantage and feature

1. Light aluminum shell ;

2. Electromagnetic brake ;

3. Electromagnetic contactor ;

4. 24V/36V transformer  device  ;

5. Hot forging with perfect strength chain;

6. Hook is constructed of anti-pull and heat-treated steel and heat-treated steel .

Warm tips

Normally,we need your confirm below info.:

1.Loading capacity?(Ton/kN)
2.Working speed?(m/min)
3.Wire rope length?(m)
4.Power supply? (220V/230V/380V/400V/415V/440V,single or three phase.Or customized design according to your demands)   

5.Where does it used?

6.What does the winch use for? (For horizontally pulling or vertically lifting? )

7.QTY?(set)

8.FOB or CIF price?(If CIF price,tell us your nearest destination port.)

9.Any other special demands?

 

Variety 

 

 

Product type Picture Brief description
JM Type electric winch winch machine for cable pulling

Loading capacity: 0.5~200 t ;

Wire rope capacity: 20~3600 m;  Click here "Send inquiry"

Working speed: 5~20 m/min;(single speed and dual speed)

Power supply: 220-690V,50/60HZ,3Phase;

JK type electric winch winch machine for cable pulling

Loading capacity: 0.5~60 t  ;

Wire rope capacity: 20~500 m;  Click here "Send inquiry"

Working speed: 20~35 m/min; (single speed and dual speed)

Power supply: 220-690V,50/60HZ,3Phase;

JKL type electric winch winch machine for cable pulling

Loading capacity: 1~10 t;

Wire rope capacity: 20~500 m;  Click here "Send inquiry"

Working speed: 20~36 m/min;

Power supply: 220-690V,50/60HZ,3Phase;

JKD type electric winch winch machine for cable pulling

Loading capacity: 0.75-2 t ;

Wire rope capacity:20~200 m;  Click here "Send iquiry"

Working speed:20~35 m/min;

Power supply: 220-690V,50/60HZ,3Phase;

JMM type friction electric winch winch machine for cable pulling

Loading capacity: 0.5~100 t ;

Wire rope capacity:20~5000 m;   Click here "Send inquiry"

Working speed:5~20 m/min;

Power supply: 220-690V,50/60HZ,3Phase;

 
building material lift winch (cable pulling winch machine)

 

  • Wire Rope 
  • The wire rope meets the requirements of GB/T8918, its safety factor greater than 5.
  • The Security lap number of Wire rope retained on the drum should not less than three rounds. When Wire rope retained on the drum just two rounds, the wire rope can withstand 125% of rated load.
 winch machine for cable pulling

 

  • Drum & drum shaft
  • The drum diameter not less than 19 times of the wire rope diameter.
  • The drum wall can withstand the wrapped tight force of wire rope; the side can withstand the lateral force produced by wire rope.
  • The distance between drum side plate peripheral to the outermost roll rope not less than twice of the wire rope diameter.
  winch machine for cable pulling

 

  • Brake & clutch
  • The brake wheel generally use ZG270-500, when the brake wheel diameter less than 300mm, it can use HT200.
  • When the clutch is in a relaxed state, the two joints should be completely separated.
 winch machine for cable pulling

 

  • Motor & Electrical system
  • The duty of the motor and quota in accordance with GB/T755 rules.
  • The protection grade motor, button, switch and other electrical device not lower than GB4942.1 and IP44 level specified in the T4942.2.
  • Electrical control equipment and component set in cabinet; electrical box has a door lock.
  • The electrical equipment installed firmly, electrical connection is good, not easy to loose, and in accordance with the provisions of GB50150.
 winch machine for cable pulling
  • Reducer
  • Reducer is mainly composed of transmission parts, shaft, bearing, box and its accessories.
  • The function of reducer is to match speed and transfer torque between motor and working machine or actuator.
winch machine for cable pulling
Quick-wear Parts of   motorized winch(cable pulling winch machine)

 

The brake system plays an important role of the safe device and even a little component break down, the whole winch was dangerous for our personal safety. Here are wearing parts in winch brake, they are tiny and even obscure but critical in the normal work.

 

  • The elastic rubber ring
  • The elastic rubber ring is a little rubber ring in the shaft coupling, it was very easy to wear in the normal work and then lead to oil leak.
 winch machine for cable pulling
  • Hydraulic pusher
  • The hydraulic pusher is power source of brake. The abnormal use will lead to the brake fail to work.

 

  • The motor for the pusher supply the power to the hydraulic pusher, and then the result is pusher and brake can’t work.
  • Shaft coupling
  • Couplings are used to join the two axes of different institutions (master axis and slave axis) so that the joint is rotated to transmit torque of mechanical parts. Overloaded power transmission at high speed, some couplings and buffers, vibration and improve the dynamic performance of the role of shafting.
 winch machine for cable pulling
  • Braking pads
  • In the brake system, the brake pads is the most critical safety components, all the good or bad effects of brake are decided by the brake pads, it really plays a decisive role, so that the brake pads are a good safety work to ensure our protection of personal safety.
   
Product Details
 
 winch machine for cable pulling
 
 
 
 
 


Certificates

  • CE : IS9001

Price

  • Price Condition : FOB
  • Price : USD1000 / set
  • Delivery Port : Qingdao

Packaging & Delivery

  • Minimum Order : 1 set

Product Image

  • Building Material Lift Winch Price/Building Winch image

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To Amelia Duan
Henan Chongpeng Crane Group Co., Ltd.
* Buying Product
- Please enter your specific buying item.
e.g. 42 inch LCD TV, leather executive chair
Category : Winches
* Message

Use English only Max. 2000 characters. (Min. 20)

Send
EC21.com does not guarantee the validity of product information or the credentials of sellers.